Your cart is empty

Mega 2560 R3 Compatible Board with Arduino Mega 2560

  • Model: MEGA2560
  • Shipping Weight: 0.01lbs
  • Units in Stock: 8
  • Manufactured by: Graylogix


The Arduino mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input and output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller, simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started

How to use
  1. Install CH340 USB Driver (download from the internet)
  2. Install Arduino IDE (Download: )
  3. Connect Board to Computer & Launch Arduino IDE.
  4. Select board as "Mega 2560" in Arduino IDE.
  5. Select the COM port (You can know COM Port No. in Control Panel > Device Manager).
  6. Start burning your programs.
Technical Specifications
  • Uses Atmel ATmega2560 Microcontroller
  • Operating Voltage: 5V
  • Input Voltage: 7V - 12V
  • Digital I/O Pins: 54 (15 pins provide PWM output)
  • Analog Input Pins: 16
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin 50 mA
  • Flash Memory: 256 KB (8 KB used by boot loader)
  • SRAM: 8 KB
  • EEPROM: 4 KB
  • Clock Speed: 16 MHz
  • CH340G for USB Communication
Package Content:
1 X Arduino Mega 2560 R3 Compatible Board with ATmega2560 - CH340G.
1 X USB Cable

Add to Cart:

This product was added to our catalog on Monday 21 September, 2015.