,

LPC1768 ARM Cortex M3 Development Board

SKU: G-3

Availability:

5 in stock


2,450.00 Rs.

5 in stock

1: INTRODUCTION & LPC1768 Board Features:

Blue Board- LPC1768 is an evaluation board for LPC1768 CORTEX M3 based microcontroller. The LPC1768 microcontroller has 512KB of internal flash and 64KB SRAM. Following are the salient features of the board.

  • Dimensions: 106 X 108 mm2
  • Two layer PCB (FR-4 material)
  • Power supply: DC 9V with power LED
  • On-board linear regulators generate +3.3V/500mA and +5v/500mA from power supply.
  • USB connector (as alternate power source).
  • Connectors:

Extension headers for all microcontroller pins. RS232 connectors (2).
PS/2 connector. JTAG connector.
SD/MMC connector.
USB A-Type USB B-Type connector with Link-LED.

  • Other Peripherals:
  • 2 line X 16 character LCD with back light control.
  • Configurable for manual and automatic program download (ISP) via serial port. User Interrupt, ADC, RTC.

2:  System Requirements:

  • Windows XP & Win 7
  • Serial or Parallel port
  • USB port

3: Starting off & connecting the hardware:

After unpacking the LPC1768 board connect a DC supply of 9V/1A to the DC jack to power the board. The LPC1768board can also be powered through USB.

4: Programming LPC1768 Board:

LPC1768 Board can be programmed through serial port UART “0” using “Flash Magic” is a freeware windows utility used to download the hex file format onto the LPC1768 Board. If your PC does not have a serial port; use an original USB to serial converter to download the hex file.

  • Programming LPC1768 Board through ISP.

The LPC1768 Board can be programmed through ISP Manual Mode.

To program in Manual mode you need a half serial cable (which just has TX, RX and GND wire connected). And connect the half serial cable to UART0 and power the board.

  • Open Flash Magic.
  • Select Device as LPC1768
  • Select the appropriate com port (See your “device manager” to find out the com port number)
  • Select the Baud Rate in between 9600 and 38400
  • Interface: None (ISP)
  • Oscillator (MHz): 12
  • Browse File name and Select the hex file to be downloaded.
  • Click on Start.

To make the board enter programming mode

  • Hold down ISP and RESET Buttons, then release RESET first and finally ISP.
  • Click on Start Programming.
  • Program uploaded successfully.
  • Click the Rest Button on the Board. That’s it, your hex file is on the board.

DOWNLOAD CD for LPC1768

SKU: G-3 Categories: ,
Weight 0.1 kg
Dimensions 10 × 10 × 10 cm

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

SHOPPING CART

close