, ,

IOT Box Arduino + GSM + Relay

SKU: IOT Box Arduino + GSM + Relay


1,500.00 Rs.

IOT Box Arduino + GSM + Relay Open Source Hardware for Arduino + GSM + 2 Relays with Battery and I/O Ports, especially best Suitable for IOT Projects and Motor Starters, Dedicated I/O pins on board can be explicitly used to interface external sensors and other I/O devices conveniently by soldering berg strips on board. External interfacing can also be done using AD0 to AD3 (pulled high internally) which are connected internally to Arduino nano and one of the pin of the white RMZ is connected to ground.

Applications of IOT Box Arduino + GSM + Relay:

Arduino Projects, IOT Projects, Realtime Projects, GSM based server communication, Data logger, Temperature Monitoring System, Sensor Data Acquisition, SMS Triggering and finally Motor Starter etc.

Specifications:

  • Charge the device battery before the first power ON for the best performance.
  • Insert the nano Sim card in the dedicated SIM slot being that as depicted in the figure from the side of the device.
  • Download and install following drivers for CP2102 on your computer.
  • Secondly Connect Antenna and power “ON” the switch.
  • In order to use the hardware in programming mode, just plug the USB cable and dump the code from the Arduino Console by selecting the appropriate com port from the tools.
  • Com port LED is lit at the time of dumping the code or data transmission between the device and the computer.
  • Blue LED Indicates the status of the GSM network,
  • 1sec Blinking = in N/W Search Mode.
  • 3 Sec Blinking = Network Acquired Successfully.
  • ½ Sec Blinking = connected to GPRS.
  • Orange LED indicates charging of the battery through the USB cable. Battery Capacity is 1000 mAh. And Green LED indicates charging completed and the battery is full.

Note:

  • This device is without firmware, please contact us for the pricing of the firmware.
  • TX of GSM SIM800C is connected to D8 of Arduino Nano
  • RX of GSM SIM800C is connected to D7 of Arduino Nano
  • Red colour TEST LED is connected to D9 of Arduino Nano
  • Relays are connected to A0 and A1 Respectively.

Click here to buy other types of modems.

SKU: IOT Box Arduino + GSM + Relay Categories: , ,
Weight 0.5 kg
Dimensions 10 × 10 × 10 cm

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

SHOPPING CART

close